[. . . ] [. . . ] B9136 IMPORTANT : AT LEAST TWO PEOPLE ARE NEEDED TO MOUNT THIS BACKBOARD ! To mount your backboard , you will need a 1/2" wrench , or an adjustable wrench and a large standard screwdriver (not furnished with board) . DO NOT DRILL HOLES IN THE BOARD Mounting holes in the goal must match the holes in this board . If holes do not match , "Goal" must be drilled to fit or replaced . MOUNTING BACKBOARD Mount backboard using four 5/16-18 x 1 3/4 truss head screws(#1) , four 5/16 split lockwashers (#2) and four 5/16-18 hex nuts (#3) as shown . GOAL HEIGHT-Official height is 10 feet from top of goal to ground . CAUTION : READ INSTRUCTIONS CAREFULLY REPLACEMENT PARTS LIST KEY NO. [. . . ] [. . . ]